Grips, bar ends and risers recommendations and prices
Grips that determine handlebar grip and comfort, bar ends that reduce vibration at the handlebar tips, handlebar risers that make the riding position more upright, and throttle locks that rest the wrist on long trips.
What to look for when buying Grips, bar ends and risers?
- Handlebar diameter: 22 mm (7/8 inch) on most motorcycles, 25.4 mm (1 inch) on some models
- The inner diameters of the right (throttle) and left grips differ; buy them as a pair
- If you will fit bar-end weights or handguards, an open-ended grip
- Material hardness: soft is comfortable, hard is long-lasting
- With risers, whether the brake and clutch hoses are long enough
Fix the grip with a suitable adhesive; a grip fitted dry can spin in the rain. After fitting the throttle grip, always check that it returns by itself when you let go.
Price ranges
- Budget: 107 – 202 ₺
- Mid-range: 243 – 2,754 ₺
- Premium: 3,307 – 9,793 ₺
Featured grips, bar ends and risers models
| Product | Level | Price |
|---|---|---|
| Kaly Motosiklet Üniversal Elcik Takımı XL-17B Reflektörlü | Budget | 107 ₺ |
| Monero Honda Pcx 150 Elcik Takımı | Budget | 110 ₺ |
| Kaly Mondial X-Treme Max Protaper Elcik Takımı Red | Budget | 115 ₺ |
| Domino Elcik Takımı Smoke | Budget | 141 ₺ |
| Kaly PH-413 Gidon Topuzu Gökkuşağı | Budget | 202 ₺ |
| Microcase Gaz Sabitleme Aparatı (Cruise Kontrol) | Mid-range | 243 ₺ |
| Kaly Üniversal Gidon Topuzu 22 mm. Blue | Mid-range | 251 ₺ |
| USR CORD35 Elcik Seti | Mid-range | 322 ₺ |
| Barracuda Üniversal Elcik Takımı Gold | Mid-range | 403 ₺ |
| Barracuda Üniversal Elcik Takımı Black | Mid-range | 403 ₺ |
| Barracuda Motosiklet Elcik Topuzlu Silver | Mid-range | 412 ₺ |
| Insigma Universal Spor Elcik Gold | Mid-range | 500 ₺ |
| GP Kompozit Honda ADV 350 2023-2025 Uyumlu Gidon Topuzu Grey | Mid-range | 875 ₺ |
| Puig 4437N ZX6R Gidon Topuzu | Mid-range | 1,405 ₺ |
| Puig 5621O Gidon Topuzu Yamaha Sari Gİdon Topuzu Gold | Mid-range | 1,630 ₺ |
| Puig 5621R Gidon Topuzu Yamaha Red | Mid-range | 1,630 ₺ |
| Puig 8505N Suzuki GSX1200 Gidon Topuzu | Mid-range | 2,754 ₺ |
| Puig 6325N Elcik Black | Premium | 3,307 ₺ |
| SW-Motech Gidon Yükseltme Aparatı 22 mm Black | Premium | 3,526 ₺ |
| SW-Motech Gidon Yükseltme 30mm - BMW 1300GS/ADV | Premium | 8,394 ₺ |
| SW-Motech Gidon Yükseltme 20mm Honda CRF1000L Africa Twin (15-19) | Premium | 8,394 ₺ |
| SW-Motech BMW Modelleri için • 32 mm Yükseltme • 20 mm Geri Alma • Gümüş | Premium | 9,793 ₺ |
FAQ
What diameter should motorcycle grips be?
On most motorcycles the handlebar diameter is 22 mm (7/8 inch); 25.4 mm (1 inch) is used on some chopper and custom models. The inner diameter of the right (throttle) grip is larger than the left one because it fits over the throttle tube; that is why grips are sold as a right-left set.
How are grips replaced?
You can remove the old grip by lifting it at the edge and spraying water or grip spray under it. Before fitting the new grip, clean the handlebar and fix the grip with a suitable adhesive. Be sure to check that the throttle grip does not rub against the bar end or the switchgear and that it returns by itself when you let go.
What are bar ends for?
Weighted bar ends fitted to the handlebar tips reduce the vibration coming from the handlebar and can ease numbness in the hands on long rides. They also protect the handlebar end and grip in a tip-over. Because bar ends are fitted with a connector that goes inside the handlebar, you need to choose a model compatible with your motorcycle.
When do you need handlebar risers?
Handlebar risers move the handlebar up or back to make the riding position more upright; they reduce the load on the back and wrists for tall riders and in adventure riding where standing is frequent. After fitting, turn the handlebar fully to both sides and check that the brake, clutch and throttle cables are not stretched.